GreenWorks Pro ULTRAPOWER 60V ST60L254 User Manual (English)

Questions and Answers:

J
John RiggsAug 10, 2025
Why does my GreenWorks Pro Trimmer not start when I push the trigger?
- N
  nchandlerAug 10, 2025
  If your GreenWorks Pro Trimmer isn't starting when you push the trigger, there could be a few reasons. First, check the electrical contact between the machine and the battery pack by removing and reinstalling the battery. The battery pack might be depleted, so ensure it's charged. Also, make sure you're pushing the lock-out button and trigger at the same time—push and hold the lock-out button, then pull the trigger to start the machine.
L
laurabrownAug 14, 2025
What to do if the line doesn't advance on my GreenWorks Pro Trimmer?
- B
  bryan13Aug 14, 2025
  If the line on your GreenWorks Pro Trimmer isn't advancing, it could be due to a few reasons. You might not have enough line on the spool, so install more line. The lines could be worn too short, so try advancing the cutting line. Alternatively, the lines might be tangled on the spool; remove them and wind them properly.
H
hicksmichaelAug 18, 2025
Why does the line keep breaking on my GreenWorks Pro Trimmer?
- D
  Daniel MendezAug 18, 2025
  If the line on your GreenWorks Pro Trimmer keeps breaking, it might be due to incorrect usage. Ensure you're cutting with the tip of the line and avoiding hard objects like stones and walls. Regularly advance the cutting line to maintain a full cutting width.
D
Denise BowmanAug 23, 2025
What causes the grass to wind around the trimmer head and motor housing of my GreenWorks Pro Trimmer?
- M
  Marie RodriguezAug 23, 2025
  Grass winding around the trimmer head and motor housing of your GreenWorks Pro Trimmer is typically caused by cutting tall grass at ground level. To prevent this, cut tall grass from the top down, removing no more than 8" in each pass.
S
Sarah GloverAug 27, 2025
How to fix increased vibration in GreenWorks Pro ULTRAPOWER 60V ST60L254?
- L
  Louis SilvaAug 27, 2025
  If the vibration in your GreenWorks Pro Trimmer increases noticeably, it may be because the line is worn down on one side and not advanced in time. Ensure the line on both sides is normal and advance the line.
E
Emily LopezAug 31, 2025
What to do if the line does not cut well on my GreenWorks Pro Trimmer?
- T
  Terri HillAug 31, 2025
  If the line on your GreenWorks Pro Trimmer isn't cutting well, the cut-off blade may have become dull. Sharpen the cut-off blade with a file or replace it.