Why does the line keep breaking on my GreenWorks Pro 2103902CT?
If the line on your GreenWorks Pro Trimmer keeps breaking, it might be due to incorrect usage. To resolve this, cut with the tip of the line, avoiding hard objects like stones and walls. Also, regularly advance the cutting line to maintain a full cutting width.
What to do if vibration increases obviously on GreenWorks Pro 2103902CT Trimmer?
If the vibration of your GreenWorks Pro Trimmer increases noticeably, it might be because the line is worn down on one side and hasn't been advanced in time. Ensure the line on both sides is normal and advance the line to fix this issue.
Why does grass wind around the trimmer head of my GreenWorks Pro 2103902CT?
If grass winds around the trimmer head and motor housing of your GreenWorks Pro Trimmer, it's likely because you're cutting tall grass at ground level. To prevent this, cut tall grass from the top down, removing no more than 8 inches in each pass.
How to sharpen GreenWorks Pro Trimmer blade if the line does not cut well?
If the line on your GreenWorks Pro Trimmer isn't cutting well, the cut-off blade may have become dull. Sharpen the cut-off blade with a file or replace it.
General| Brand | GreenWorks Pro |
|---|---|
| Model | 2103902CT |
| Category | Trimmer |
| Language | English |
Explains the intended use of the grass cutting machine.
Provides a labeled diagram of the string trimmer components.
Instructions for opening the package and removing the machine and parts.
Steps to attach the edge guide to the trimmer head.
Instructions on how to attach the guard to the trimmer head.
Steps to connect the upper and lower shafts of the trimmer.
Steps to attach the auxiliary handle to the shaft.
Instructions for inserting the battery pack into the machine.
Instructions for removing the battery pack from the machine.
Identifies the main controls of the string trimmer.
Procedure for starting the string trimmer.
Procedure for stopping the string trimmer.
How to automatically extend the cutting line during operation.
Instructions to change the cutting width from 11 to 13 inches.
Explains the function of the blade that trims the cutting line.
Provides advice for effective and safe operation of the trimmer.
Advice on how to cut grass effectively and avoid hazards.
General advice for maintenance, including using manufacturer parts.
Instructions for cleaning the string trimmer after use.
Step-by-step guide to replace the spool with new cutting line.
Detailed instructions for replacing the cutting line on the spool.
Procedure for replacing the bump knob on the trimmer head.
Steps to take when moving the string trimmer.
Instructions for safely storing the string trimmer.
To Next Page