36
Retension chain, Refer to
Adju st in g Chain Tens io n
earlier in this manual.
Refer to Replacing Bar and
Chain earlier in this manual.
Inspect guide bar and chain
for damage.
Sharpen chain.
Reverse direction of chain.
MAINTENANCE
STORING THE PRODUCT
• Clean all foreign material from the product. Store it in a well-ventilated place that is
inaccessible to children. Keep away from corrosive agents such as garden chemicals and de-
icing salts.
• Always place the scabbard on the bar and chain before storing or transporting the chainsaw
• Use caution to avoid the sharp teeth of the chain
TROUBLESHOOTING
PROBLEM
Bar and chain running hot
and smoking.
Motor runs, but chain is not
rotating.
Motor runs, chain rotates but
does not cut.
CAUSE
Check chain tension for over-
tight condition.
Chain-oil tank empty.
Chain tension too tight.
Check guide bar and chain
assembly.
Check guide bar and chain
for damage.
Dull chain.
Chain on backwards.
REMEDY
Plug in the power cord.
To Next Page
Loading...
