13
UNPACKING
This product requires assembly.
Carefully remove the product and any accessories from the box. Make sure that all items
listed in the packing list are included.
Inspect the product carefully to make sure no breakage or damage occurred during shipping.
Do not discard the packing material until you have carefully inspected and satisfactorily
operated the product.
If any parts are damaged or missing, please call 1-888- 909-6757 for assistance.
PACKING LIST
Pole Saw
Extension pole
Owner's Manual
Carry storage bag
WARNING
If any parts are damaged or missing, do not operate this product until the parts are replaced.
Failure to heed this warning could result in serious personal injury.
WARNING
Do not attempt to modify this product or create accessories not recommended for use with this
leading to possible serious personal injury.
WARNING
Disconnect the pole saw from the power supply until assembly is complete. Failure to comply could
result in accidental starting and possible serious personal injury.
CONNECTING THE POLES (See Fig. 3)
ASSEMBLY
Before using the pole saw, assembly is required. When removed from the box, there are the
three poles as shown above.
Remove packaging material from cord and discard.
Insert the intermediate pole into the handle pole and slide together. The tubes are egg-shaped
and will only install one way.
Lower the collar on the intermediate pole to the threaded base on the handle pole and rotate
clockwise to secure.
Repeat this process to attach the intermediate pole to the powerhead pole.
To Next Page
Loading...
