23
IMPORTANT:
When servicing, use only identical replacement parts. Use of any other parts may create a hazard
or cause product damage.
IMPORTANT:
Always wear safety goggles or safety glasses with side shields during power tool operation or when
blowing dust. If operation is dusty, also wear a dust mask.
IMPORTANT:
Before inspecting, cleaning or servicing the unit, stop the motor, wait for all moving parts to stop,
and disconnect from power supply. Failure to follow these instructions can result in serious personal
injury or property damage.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from
various types of commercial solvents and may be damaged by their use. Use clean cloths to
remove dirt, dust, oil, grease, etc.
IMPORTANT:
with plastic parts at any time. Chemicals can damage, weaken, or destroy plastic, which may result
in serious personal injury.
All pole saw servicing, other than the items listed in the maintenance instructions in the Owner’s
Manual, should be performed by an authorized service dealer.
To Next Page
Loading...
