What to do if my GreenWorks 2501202 does not start?
If your GreenWorks Lawn Mower doesn't start, there could be several reasons: * Grass may be jammed between the deck and blade. Remove the battery and check under the deck for any obstructions. * The battery might not be fully inserted. Check the connection and ensure it clicks into place. * The battery may require replacement. Replace the battery.
Why does my GreenWorks 2501202 stop while mowing?
If your GreenWorks Lawn Mower stops during mowing, there might be several reasons: * The blade height could be too low, in which case you should increase the blade/cutting height. * The battery pack may be out of power, so ensure it's charged. * Grass clippings might be attaching to the deck or blade; remove the battery pack and check the deck. * The machine's operating temperature could be too high; allow the machine to cool.
What to do if my GreenWorks Lawn Mower doesn't start?
If your GreenWorks Lawn Mower doesn't start, here are a few things to check: * The battery capacity might be low, so charge the battery pack. * The bail switch could be defective, requiring a replacement. * The safety key might not be inserted; make sure to put it in.
Why is my GreenWorks 2501202 Lawn Mower not mulching correctly?
If your GreenWorks Lawn Mower does not mulch correctly, it could be because: * Wet grass clippings attach to the deck. Wait until the grass dries before mowing. * The mulch plug is missing. Install the mulch plug.
How to fix a GreenWorks 2501202 that does not mulch properly?
If your GreenWorks Lawn Mower does not mulch properly: * Wait until the grass dries before mowing because wet grass clippings may be sticking to the underside of the deck. * Install the mulching plug if it is missing.
How to fix uneven cutting with GreenWorks 2501202 Lawn Mower?
If your GreenWorks Lawn Mower cuts grass unevenly, it could be due to: * A rough lawn. Examine the mowing area. * The blade height not set correctly. Adjust the blade/cutting height to a higher position.
Why is my GreenWorks 2501202 hard to push?
Your GreenWorks Lawn Mower might be hard to push because: * The grass is too tall, or the cutting height is too low. Raise the cutting height. * The rear of the grass catcher bag is dragging in thick grass. Empty the grass clippings from the bag.
What to do if GreenWorks 2501202 cuts grass unevenly?
If your GreenWorks Lawn Mower cuts the grass unevenly: * Check the mowing area, as the lawn may be rough or uneven. * Move the wheels to a higher setting, as the cutting height may not be set properly.
Why is my GreenWorks Lawn Mower excessively noisy and vibrates?
If your GreenWorks Lawn Mower is excessively noisy and vibrates: * Stop the motor and inspect for damage, as the motor shaft may be bent. Repair any damage before restarting. * The blade may be unbalanced.
Why is my GreenWorks 2501202 so hard to push?
If your GreenWorks Lawn Mower is hard to push, it could be due to: * The grass being too tall or the blade height being too low. Increase the blade/cutting height. * The grass catcher and blade dragging in thick grass. Empty the grass clippings from the grass catcher.
General| Voltage | 40V |
|---|---|
| Cutting Width | 20 inches |
| Deck Material | Steel |
| Mulching Capability | Yes |
| Bagging Capability | Yes |
| Side Discharge | Yes |
| Battery Amp Hour | 4 Ah |
| Power Source | Battery |
| Battery Included | Yes |
| Charger Included | Yes |
| Type | Electric Lawn Mower |
| Cutting Height | 1.5 to 3.5 inches |
| Grass Bag Capacity | 1.6 bushels |
Key safety guidelines, warnings, and hazard alerts for mower operation.
Instructions for safe mowing practices and required protective equipment.
Guidelines for child safety and essential battery/charger handling.
Comprehensive safety rules and maintenance tips for the battery pack.
Instructions for battery storage and safe operation of the battery charger.
Guide on how to properly insert, secure, and remove the battery pack.
Procedure for starting and stopping the mower's motor safely.
Step-by-step guide for safely removing and installing a new mower blade.
Troubleshooting steps for when the mower does not power on.
To Next Page
