19
OPERATION
USING THE SPRAY WAND TRIGGER
(See Figure 12.)
For greater control and safety, keep both hands on the trigger handle at all times.
• Pull back and hold the trigger to operate the pressure washer.
•
USING NOZZLE
(See Figure 13.)
NOTE:
1-Pull back the quick-connect collar
2-Push the nozzle into place
3-Push the collar forward
Fig. 12
Trigger
Fig. 13
3
Spray wand
2
1
Nozzle
TO ENGAGE THE LOCK-OUT:
• Push up on the lock-out until it clicks into the slot.
TO DISENGAGE THE LOCK-OUT:
• Push the lock-out down and into its original position.
To Next Page
Loading...
