16
OPERATION
Fig. 6-1 Fig. 6-2
DETERGENT ADDING AND USE
(See Figure 6-1.)
Use only detergents designed for pressure washers; household detergents, acids, alkalines,
Many detergents may require mixing prior to use. Prepare cleani ng solution as instructed on the
solution bottle.
To add:
• Disconnect pressure washer from power supply.
•
• Remove cap from detergent tank.
• Pour detergent into tank.
To use:
C A U T I O N
Use only approved press ure washer cleaners. Do not use bleach, chlorine,or any cleaners
containing acids.
• Connect black soap nozzle to the wand conn ector .
(See Figure 6-2.)
• Squeeze the trigger and the detergent will automatically be mixed with the water and dispensed
from the nozzle.
NOTE: Use a funnel, if needed, to prevent accidental spilling of the detergent outside the tank. If any deter-
• Reinstall cap.
Soap is applied under low pressure high volume for optimum performance
Soap can not be applied under high pressure with this machine
SOAP APPLICATION
For Soap Application:
Use Black Soap tip only
To Next Page
Loading...
