How to fix the line if it does not advance on my GreenWorks 82ST15?
If the line on your GreenWorks Trimmer isn't advancing, it could be due to: * Lines being welded together. Lubricate them with silicone spray. * Not enough line on the spool. Install more line. * Lines being worn too short. Advance the cutting line. * Lines being tangled on the spool. Remove the lines and rewind them.
Why does the line keep breaking on my GreenWorks 82ST15?
The line on your GreenWorks Trimmer may be breaking because the machine is used incorrectly. Cut with the tip of the line, avoiding stones, walls, and other hard objects. Regularly advance the cutting line to maintain a full cutting width.
How to prevent grass from winding around the trimmer head of my GreenWorks 82ST15 Trimmer?
To prevent grass from winding around the trimmer head and motor housing of your GreenWorks Trimmer, cut tall grass from the top down and remove no more than 8" in each pass.
Why won't my GreenWorks 82ST15 start?
Your GreenWorks Trimmer might not start due to several reasons: * There may be no electrical contact between the battery pack and the machine. To fix this, remove the battery pack, check the contact, and reinstall it. * The battery pack could be depleted. In this case, charge the battery pack. * The lock-out button and trigger may not be pushed simultaneously. Ensure you pull and hold the lock-out button, then pull the trigger to start the machine.
What causes increased vibration in my GreenWorks Trimmer?
Increased vibration in your GreenWorks Trimmer can be caused by the line wearing down on one side and not being advanced in time. Ensure the line on both sides is normal and advance the line.
How to improve cutting performance of my GreenWorks 82ST15 Trimmer?
If the line on your GreenWorks Trimmer does not cut well, the cut-off blade may be dull. Sharpen the cut-off blade with a file or replace it.
General| Brand | GreenWorks |
|---|---|
| Model | 82ST15 |
| Category | Trimmer |
| Language | English |
Details the intended use of the machine for cutting grass and weeds at ground level.
Illustrates the main components of the string trimmer with numbered parts.
Lists all items included in the package with the string trimmer.
Instructions for opening the package and removing contents before assembly.
Steps to securely attach the guard to the trimmer head using provided screws.
Procedure for attaching the auxiliary handle to the shaft for better control.
Steps for correctly inserting the battery pack into the machine's compartment.
Instructions on how to release and remove the battery pack from the machine.
Instructions on how to start the string trimmer using the lock-out button and trigger.
Instructions on how to stop the string trimmer by releasing the trigger.
General advice and warnings for operating the machine safely and effectively.
Guidance on how to cut grass effectively and safely with the trimmer.
Explains the function of the cut-off blade for trimming the cutting line automatically.
How to extend the cutting line by bumping the trimmer head on the ground.
States that maintenance not covered should be done by a dealer or service center.
Steps for cleaning the trimmer after use, including what not to use.
Instructions on how to disassemble the trimmer head to remove cutting line.
Steps to wind new cutting line onto the spool and through the trimmer head.
Procedure to loosen and remove the trimmer head from the shaft.
Steps to reassemble the trimmer head after maintenance or repair.
Safety precautions and steps for moving the string trimmer.
Guidelines for storing the string trimmer safely and properly.
Details the warranty for the motor, PCB boards, and gear box.
Details the warranty for specific Greenworks commercial battery packs.
Lists wearable parts covered for 60 days from date of purchase.
To Next Page
