GreenWorks G40LT - Description; 1.1 Purpose; 1.2 Overview; Safety

1 Description...................................4
1.1 Purpose......................................................4
1.2 Overview.................................................... 4
2 Safety............................................4
3 Installation................................... 4
3.1 Unpack the machine...................................4
3.2 Attach the edge guide................................ 4
3.3 Attach the guard.........................................4
3.4 Assemble the shaft.....................................5
3.5 Attach the auxiliary handle......................... 5
3.6 Install the battery pack............................... 5
3.7 Remove the battery pack........................... 5
4 Operation..................................... 5
4.1 Start the machine....................................... 5
4.2 Stop the machine....................................... 5
4.3 Operation tips.............................................5
4.4 Cutting tips................................................. 5
4.5 Adjust the length of the cutting line............ 6
4.6 Adjust the length of the cutting line
manually.....................................................6
4.7 Line cut-off blade........................................6
5 Maintenance.................................6
5.1 General information....................................6
5.2 Clean the machine..................................... 6
5.3 Replace the spool.......................................6
5.4 Replace the cutting line..............................7
6 Transportation and storage........7
6.1 Move the machine......................................7
6.2 Store the machine...................................... 7
7 Troubleshooting.......................... 7
8 Technical data..............................8
9 Warranty.......................................9
10 EC Declaration of conformity.....9
3
English
EN