GreenWorks GD60BCB - Assembling Trimmer Head; Moving the Machine; Storing the Machine

6.8 ASSEMBLE THE TRIMMER HEAD
Figure 29 - 30.
1. Put the metal rod in the specified angle
transmission hole to fix the trimmer head.
2. Assemble the trimmer head.
3. Turn the trimmer head counterclockwise to
tighten it.
4. Remove the metal rod.
IMPORTANT
You must install the cut-off blade when you use the
trimmer head.
7 TRANSPORTATION AND STORAGE
7.1 MOVE THE MACHINE
When you move the machine, you must:
• Wear gloves.
• Stop the machine.
• Remove the battery pack.
• Assemble the blade guard.
7.2 STORE THE MACHINE
• Remove the battery pack from the machine and
charge it.
• Make sure that children cannot come near the
machine.
• Keep the machine away from corrosive agents such
as garden chemicals and de-icing salts.
• Secure the machine during transportation to prevent
damage or injury. Clean and examine the machine
for any damage.
8
English
EN