1 DESCRIPTION
1.1 PURPOSE
This machine is used to cut grass, light weeds, and
other similar vegetation at or around ground level. The
cutting plane must be approximately parallel to the
ground surface. You cannot use the machine to cut or
chop hedges, shrubs, bushes, flowers and compost.
1.2 OVERVIEW
Figure 1 - 30.
1
Battery release button
2
On/off button
3
Speed button
4
Lock-out button
5
Trigger
6
Auxiliary handle
7
Upper shaft
8
Coupler
9
Lower shaft
10
Trimmer head
11
Cut-off blade
12
Guard
13
Release button
14
Positioning hole
15
Hex wrench
16
Knob
17
Cap
18
Lower support
19
Tab
20
Spool cover
21
Spool housing
22
Spool
23
Line exist hole
24
Slot
25
Angle transmission hole
26
Metal rod
27
Nut
28
Outer cup
29
Blade
A
Direction of roatation
B
Best cutting area
C
Dangerous cutting area
2 GENERAL POWER TOOL SAFETY
WARNINGS
WARNING
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or battery-
operated (cordless) power tool.
3 SAFETY
WARNING
Make sure that you follow all safety instructions.
Refer to Safety Manual.
4 INSTALLATION
4.1 UNPACK THE MACHINE
WARNING
Make sure that you correctly assemble the machine
before use.
WARNING
• If parts of the machine are damaged, do not use
the machine.
• If parts are missing, do not operate the machine.
• If parts are damaged or missing, contact the
service center.
1. Open the package.
2. Read the documentation provided in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and packing material in
compliance with local regulations.
WARNING
For your personal safety, do not insert battery before
the tool is assembled completely.
4.2 ATTACH THE GUARD
Figure 2.
4
English
EN
To Next Page
Loading...
