12 INSTALL THE GRASS
CATCHER
1. Remove the mulch plug.
2. Open the rear discharge door and hold it.
3. Hold the the grass catcher by its handle and put the hooks
over the slots.
4. Close the rear discharge door.
13 INSTALL THE MULCH PLUG
1. Remove the grass catcher.
2. Open the rear discharge door and hold it.
3. Hold the mulch plug by its handle and fit it in the
discharge chute.
4. Close the rear discharge door.
14 SET THE BLADE HEIGHT
The machine can be set to different blade heights.
1. Push the height adjustment button, lfit the height
adjustment bar to a higher position to increase the blade
height.
2. Push the height adjustment button, press the height
adjustment bar to a lower position to decrease the blade
height.
15 INSTALL THE BATTERY PACK
WARNING
• If the battery pack or charger is damaged, replace the
battery pack or the charger.
• Stop the machine and wait until the engine stops before
you install or remove the battery pack.
• Read, know, and do the instructions in the battery and
charger manual.
WARNING
USE ONLY 24V BATTERY. DO NOT USE DUAL-
VOLTAGE 24/48V BATTERY.
10
English
EN
To Next Page
Loading...
