Item Temperature
Mower storage temperature range 32°F (0°C) - 113°F
(45°C)
Mower operation temperature
range
32°F (0°C) - 113°F
(45°C)
Battery charging temperature range 39°F (4°C) - 104°F
(40°C)
Charger operation temperature
range
39°F (4°C) - 104°F
(40°C)
Battery storage temperature range 32°F (0°C) - 113°F
(45°C)
Battery discharging temperature
range
32°F (0°C) - 113°F
(45°C)
3.5 LAWN MOWER SAFETY
WARNINGS
• Before using, always visually inspect to see that the
blade, blade bolt and the blade assembly are not worn
or damaged. Replace worn or damaged components in
sets to preserve balance. Replace damaged or unreadable
labels.
• Do not mow excessively step slopes.
• Stop the blade(s) if the machine has to be tilted for
transportation when crossing surfaces other than grass,
and when transporting the machine to and from the area
to be used.
• Switch on the motor carefully according to instructions
and with feet well away from the blade(s).
• Do not tilt the machine when switching on the motor,
except if the machine has to be tilted for starting. In this
case, do not tilt it more than absolutely necessary and lift
only the part, which is away from the operator.
• Do not start the machine when standing in front of the
discharge opening.
• Do not transport the machine while the power source is
running.
• Stop the machine, remove the disabling device and
battery pack. Make sure that all moving parts have come
to a complete stop
- whenever you leave the machine;
- before clearing blockages or unclogging chute;
- before checking, cleaning or working on the machine;
- after striking a foreign object. Inspect the machine for
damage and make repairs before restarting and operating
the machine.
• Keep all nuts, bolts and screws tight to be sure the
machine is in safe working condition.
• On machines with multi blade, take care as rotating one
blade can cause other blades to rotate.
• Be careful during adjustment of the machine to prevent
entrapment of the fingers between moving blades and
fixed parts of the machine.
• Always allow the machine to cool down before storing.
• When servicing the blades be aware that, even though
the power source is switched off, the blades can still be
moved.
4 SYMBOLS ON THE PRODUCT
Some of the following symbols may be used on this
mower. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the
mower better and safer.
Symbol Name Explanation
V Volt Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
min Minutes Time
/min Per Minute
Revolutions, strokes, surface
speed, orbits etc., per minute
Alternating
Current
Type of current
Direct Current
Type or a characteristic of cur-
rent
No Load Speed Rotational speed, at no load
Safety Alert
Precautions that involve your
safety.
Eye Protection
Always wear eye protection
with side shields marked to
comply with ANSI Z87.1 when
operating this equipment.
WARNING ---
Wet Conditions
Do not expose the product to
rain or moist conditions.
Read Opera-
tor’s Manual
To reduce the risk of injury,
user must read and understand
operator’s manual before using
this product.
Maintain Safe-
ty Devices
Do not open or remove safety
devices while the tool is run-
ning.
Look Behind
While Backing
Look down and behind first
to avoid tripping when pulling
back.
7
English
EN
To Next Page
Loading...
