1 Description.................................... 2
1.1 Purpose...................................................... 2
1.2 Overview.................................................... 2
2 IMPORTANT SAFETY
INSTRUCTIONS........................... 2
3 Symbols on the machine............... 3
4 Risk levels..................................... 4
5 Service.......................................... 4
6 Environmentally safe battery
disposal......................................... 4
7 Installation..................................... 4
7.1 Unpack the machine...................................4
7.2 Attach the guard......................................... 5
7.3 Assemble the shaft.....................................5
7.4 Attach the auxiliary handle......................... 5
7.5 Install the battery pack............................... 5
7.6 Remove the battery pack........................... 5
8 Operation.......................................5
8.1 Start the machine....................................... 6
8.2 Stop the machine....................................... 6
8.3 Adjust the length of the cutting line............ 6
8.4 Adjust the length of the cutting line
manually..................................................... 6
8.5 Change to the edging mode....................... 6
8.6 Pivoting Head Function ............................. 7
8.7 Operation tips............................................. 7
8.8 Cutting tips................................................. 7
9 Maintenance..................................7
9.1 General information....................................7
9.2 Clean the machine..................................... 8
9.3 Replace the spool.......................................8
9.4 Replace the cutting line.............................. 8
10 Transportation and storage........... 8
10.1 Move the machine...................................... 8
10.2 Store the machine...................................... 9
11 Troubleshooting.............................9
12 Technical data............................. 10
13 Limited warranty.......................... 10
14 Exploded view............................. 11
1
English
EN