CAUTION
IF THE BATTERY DOES NOT FIT EASILY INTO
THE BATTERY HOLDER, IT MAY NOT BE
INSTALLED CORRECTLY, WHICH CAN CAUSE
DAMAGE TO THE BATTERY AND/OR THE
PRODUCT.
3. Make sure that the battery is installed securely.
5.1.5 START THE PRODUCT
1. Simultaneously push the safety-lock button (1)
and pull the trigger (2).
2. Adjust the speed according to the grass condition
by sliding the speed switch.
5.2 OPERATE THE PRODUCT
5.2.1 ADJUST THE LENGTH OF THE CUTTING
LINE
When the cutting line becomes short during operation,
bump the trimmer head on a hard, flat surface to
extend more cutting line out. It is recommended to
operate the product on high-speed mode for dense
work areas.
This trimmer is equipped with a string cut-off blade
on the trimmer guard. The string cut-off blade
continuously trims the line to ensure a consistent
and efficient cutting diameter. This will maintain best
performance and keep line long enough to advance
properly.
5.2.2 ADJUST THE CUTTING DIAMETER
Note: The cutting diameter of the product is set to 15
in. (38 cm), but it can be modified to 17 in. (43 cm) for
a larger cutting area or kept at 15 in. (38 cm) for longer
runtime.
1. First, start by removing the battery.
2. Unscrew the blade screws securing the string cut-
off blade with the hex key.
3. Turn the string cut-off blade 180°.
4. Securely tighten the blade screws.
9
English
EN
To Next Page
Loading...
