H60.0.13.6C-17 Operating Manual GMH 3851 Page 22 of 22
_____________________________________________________ _____________________________________________________________________________
15 Appendix B: Additional materials
Select material you want to measure, enter number on the device, e.g. concrete b25 = b. 6
15.1 Measuring of building materials
Concrete 200kg/m³ B15 (200 kg concrete per 1m³ sand)
Concrete 350kg/m³ B25 (350 kg concrete per 1m³ sand)
Concrete 500kg/m³ B35 (500 kg concrete per 1m³ sand)
gas-aerated concrete (Hebel)
gas-aerated concrete (Ytong PPW4, gross density 0,55)
Ardurapid screed-concrete
Screed-concrete ZE, ZFE without additives
Screed-concrete ZE, ZFE with bitumen additives
Screed-concrete ZE, ZFE with synthetic additives
Lime sand bricks (14 DF (200), gross density 1,9)
soft-fibre-panel-wood, bitumen
Concrete bounded fake boards
The accuracy of measuring building materials depends on manufacturing and using. The used additives may vary from
manufacturer to manufacturer, therefore deviating measure results may occur. The given measuring-range is the
theoretically measurable range.
15.2 Measuring of agricultural bulk cargo
Injection probe GSF 38/50
Injection probe GSF 38/50 or GMS 300/91
Injection probe GSF 38/50 or GMS 300/91
Injection probe GSF 40 or GMS 300/91
Injection probe GSF 40 or GMS 300/91
15.3 Estimation of additional materials
Following materials may be well estimated with the help of the device, but you won’t reach such high accuracy than with
materials listed in appendix A and B.
Injection probe GSF 38/40/50 or GMS 300/91
Wood fibre insulating wall panel
Phenolic resin-fake boards
To Previous Page
Loading...
Need help?
General
