Page 17
PTFM 1.0 Portable Transit Time Flow Meter
SPECIAL FUNCTIONS
Language Select English, French or Spanish
Reset Totalizer Press and select Yes to erase and restart the
totalizer at zero.
Negative Totals Select Yes to have reverse flow readings deducted
from the totalizer. Select NO to totalize forward
flow only and ignore reverse flow.
Cal Constant Factory set during calibration. (Refer to the calibration
certificate supplied with your instrument.)
Restore Defaults Select Yes and press to erase all user settings and return
the instrument to factory default settings.
New Password Select any number from 0000 to 9999 and press .
Default setting of 0000 will allow direct access to the
calibration menus. Setting of any password greater
than 0000 will require the password to be entered to
access the calibration menus.
Press to return to Menu Selections.
To Next Page
Loading...
