Smart Microinverter Introduction
Smart grid tie inverter is a compact unit, which directly converts direct
current into alternating current for powering appliances and/or office
equipments and connecting to utility grid. The AC output from Smart
Microinverter is synchronized and in-phase with the utility grid. It is a key
device of power generation systems such as PV power generation system,
wind turbine power generation system. Smart Microinverter specially
optimized design to work with modularization of DC power supplies which
includes the mainstream solar modules, 18V (36 cells), 24V (60 cells) and
36V (72 cells) monocrystal and/or Polycrystalline solar panels, wind
turbines and batteries. Smart Microinverters are stabilization, reliable and
high conversion efficiency items. It is the best choice for PV power
generation systems.
Smart Microinverter can be easily placed and attached to the rack
underneath of PV module. No need spaces for independent installation
and low voltage DC wire connects from the PV module to Smart
Microinverter can eliminate the risk of high DC voltage. Distributed
modularization design philosophy for Smart Microinverter insures the
productiveness of the whole system and will not affect by a single point of
failure. Each Smart Microinverter is individually connected to each PV
module in the array. This unique configuration means that an individual
Maximum Peak Power Point Tracker (MPPT) controls each PV modules and
insures that the maximum power available from each PV module is
exported to the utility grid regardless of the performance of the other PV
modules in the array which may be affected by shading, soiling, orientation
or mismatch, etc. Smart Microinverter insures top performance for
maximizing energy production from the whole PV system and gets return
on investment in less time.
1/13
To Next Page
Loading...