7
COMPRESSOR PARTS DESCRIPTION
KEY DESCRIPTION FUNCTION
1 Handle Used to lift, carry, and position unit.
2 Air Tank Drain Allows moisture to be drained from tanks
3 Rubber Foot Provides stable footing, reduces vibration
4 Air Storage Tank Stores compressed air
5 Cooling System Cools compressor components
6 Safety Relief Valve Releases excessive air pressure
7 Air Outlet Fitting Allows quick connection of air hose
8 Air Outlet Pressure Gauge Indicates air pressure to air hose
9 Regulator Control Knob Adjusts discharge air pressure setting
10 Pressure Switch Controls compressor motor start/stop
11 On-Off Control Turns compressor on or off
12 Motor Reset Switch Thermal overload protects motor
13 Drain Plug Allows crankcase oil to be drained
14 Dipstick Used to check oil level in crankcase
15 Compressor Pump Compresses air
16 Air Intake/Filter Filters intake air
17 Cold Start Valve Helps compressor make cold starts
18 Tank Pressure Gauge Indicates air pressure in air tanks
115v AC Power Cord Provides power to compressor motor
To Next Page
Loading...
