Grizzly G0441 Instruction Manual

26. Fasten the screw on the handle, and install
the other handle on the left side of the cable.
27. Insert the covers on the handles so the red
handle is on the right side and the black
handle is on the left side. (If you have difficul
-
ties installing the covers, apply a little rubbing
alcohol on the handle to slide the covers on
easily. Allow the alcohol to dry before pulling
on the handles.)
28. Make sure that when the red handle is up the
filter brush is at the bottom of the filter.
29. Secure the brush to the right side cable by
tightening the screw on the brush clamp.
Brush Clamp

Grizzly G0441 Specifications

General

Brand	Grizzly
Model	G0441
Category	Dust Collector
Language	English