COPYRIGHT © OCTOBER, 2007 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#TR10088 PRINTED IN CHINA
The Model G0454Z is the same as the Model G0454, except it has a spiral cutterhead and pedestal
mounted ON/OFF switch. Besides the data sheet, parts, and wiring diagram in this insert, the content in
the Model G0454 owner's manual is the same for both machines. Before operating your new machine, you
MUST read and understand this insert and the entire Model
G0454 manual to reduce the risk of injury from
improper use or setup.
If you have any further questions about this manual insert or the differences between the Model G0454Z
and the Model G0454, contact our Technical Support at (570) 546-9663 or email
techsupport@grizzly.
com.
MODEL G0454Z
20" PLANER
w/SPIRAL CUTTERHEAD
MANUAL INSERT
To Next Page
