Grizzly G0454Z User Manual

MODEL G0453Z/G0454Z
15" & 20" MOBILE PLANER
w/SPIRAL CUTTERHEAD
OWNER'S MANUAL
COPYRIGHT © APRIL, 2009 BY GRIZZLY INDUSTRIAL, INC., REVISED JUNE, 2018 (HE)
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
(FOR MODELS MANUFACTURED SINCE 1/09) #TS11416 PRINTED IN CHINA
Model G0454Z Shown

Grizzly G0454Z Specifications

General

Type	Planer
Motor Power	5 HP
Voltage	220V
Cutterhead Speed	5000 RPM
Number of Knives	3
Phase	Single-Phase
Maximum Cutting Width	20"
Maximum Cutting Height	8 inches
Minimum Cutting Thickness	1/8 inch
Maximum Cutting Depth	1/8 inch per pass
Feed Rate	16 FPM
Cutterhead Diameter	3 inches
Dust Port Diameter	4"

Summary

G0453Z Machine Data Sheet (Continued)

G0454Z Machine Data Sheet (Continued)

Section 1: Safety Instructions

Understanding Safety Symbols and General Warnings

Explanation of safety symbols and overall machinery safety rules.

Section 1: Safety Instructions (Continued)

Specific Safety Rules for Machine Operation

Detailed safety instructions covering power, guards, tools, and environment.

Section 1: Safety Instructions (Continued)

Additional Planer-Specific Safety Precautions

Specific safety advice related to planer operation, kickback, and material handling.

Section 2: Circuit Requirements

220V Single-Phase Power Connection and Extension Cords

Requirements for connecting the planer to power and using extension cords.

Section 3: Setup Procedures (Continued)

Dust Collection and Gearbox Oil Check

Section 3: Setup Procedures (Continued)

Performing the Initial Test Run

Steps to verify the machine operates correctly after setup.

Section 3: Setup Procedures (Continued)

Section 4: Operations

Basic Controls and Operation Overview

Section 4: Operations (Continued)

Section 4: Operations (Continued)

Wood Hardness, Feed Rate, and Depth of Cut

Depth of Cut and Bed Roller Height Adjustment

Section 6: Maintenance Schedule

Routine Maintenance Tasks and Frequencies

Schedule for cleaning, lubrication, and checks based on usage hours.

Section 6: Maintenance (Continued)

Lubrication Procedures for Key Components

Lubricating Chains and Changing Gearbox Oil

Section 7: Service and Troubleshooting

Motor and Electrical Troubleshooting

Solutions for common motor start issues, stalling, or vibration problems.

Section 7: Service and Troubleshooting (Continued)

Troubleshooting Machine Operation Issues

Diagnosing and resolving problems like snipe, workpiece stopping, or inconsistent cuts.

Rotating and Replacing Cutterhead Inserts

Procedures for maintaining the spiral cutterhead inserts for optimal cutting.

Setting Feed Roller, Chip Breaker, and Pressure Bar Heights

Adjusting key components for correct workpiece movement and finish.

Scale Calibration and Anti-Kickback Fingers

Adjusting the scale and maintaining the anti-kickback safety feature.

Section 7: Service and Troubleshooting (Continued)

Section 7: Service and Troubleshooting (Continued)

V-Belt Tensioning and Replacement

Pulley Alignment and Table Height Chain Tension

Calibration Methods: Rotacator and Wood Blocks

Adjusting Roller Heights and Chip Deflector

Section 8: Wiring Instructions

Electrical Safety and Wiring Diagrams

Safety precautions for wiring and electrical schematics for both models.

Section 8: Wiring Instructions (Continued)

Wiring Safety and Model-Specific Diagrams

Electrical safety rules and wiring diagrams for G0453Z and G0454Z.

Warranty and Returns Information

Grizzly Product Warranty and Claims Process