-4-
Model G0453Z/G0454Z (Mfg. 1/09+)
Internal Components
Workpiece
Figure 2. Workpiece path and major planing components (side cutaway view).
A. Anti-Kickback Fingers: Provide additional
safety for the operator.
B. Serrated Infeed Roller: Pulls the workpiece
toward the cutterhead.
C. Chip Breaker: Breaks off chips created by
the cutterhead to prevent tearout and diverts
the chips to the dust port.
D. Chip Deflector: Directs chips into the dust
hood.
E. Cutterhead: Holds the indexable car-
bide inserts that remove material from the
workpiece.
A
C
B
E
H
H
I
F
F. Pressure Bar: Stabilizes the workpiece as it
leaves the cutterhead and assists in deflect-
ing wood particles toward the dust hood
(G0454Z only).
G. Outfeed Roller: Pulls the workpiece through
the planer.
H. Table Rollers: Provide a rolling surface to
enable the feed rollers to pull the workpiece
along.
I. Planer Table: Provides a smooth and level
path for the workpiece as it moves through
the planer.
G
D
To Next Page
Loading...
Need help?
General
