Grizzly G0458 Owner's Manual

-24-
Model G0458 (Mfg. Since 5/11)
SECTION 5: ACCESSORIES
PRO-STICK
®
Sanding Pad
Extend the life of your sandpaper! Just feed this
crepe-rubber cleaning pad through your drum
sander to remove dust build-up from the sandpa-
per without damage.
Size Model
15" X 20" X 1
1
⁄8" ...................................... H2845
Figure 27. PRO-STICK
®
sanding pad.
T21992— Power Twist
®
V-Belt
1
⁄2" x 4'
Smooth running with less vibration and noise
than solid belts. The Power Twist
®
V-belts can be
customized in minutes to any size—just add or
remove sections to fit your needs. Size:
1
⁄2" x 4';
replaces all "A" sized V-belts. Requires one Power
Twist
®
V-belt to replace the stock V-belt on your
Model G0458.
Aluminum Oxide Sanding Rolls 3" x 22'
T23880—60 Grit: Use for thickness sanding and
glue removal.
T23881—80 Grit: Use for removing planer marks
and initial finish sanding.
T23882—100 Grit: Use for removing planer marks
and initial finish sanding.
T23883—120 Grit: Use for finish sanding.
T23884—150 Grit: Use for finish sanding.
T23885—180 Grit: Use for finish sanding.
T23886—220 Grit: Use for finish sanding.
Figure 28. Power twist V-belt.
Some aftermarket accessories can be
installed on this machine that could cause
it to function improperly, increasing the risk
of serious personal injury. To minimize this
risk, only install accessories recommended
for this machine by Grizzly.
NOTICE
Refer to the newest copy of the Grizzly
Catalog for other accessories available for
this machine.
G1163—1HP Floor Model Dust Collector
G0710—1HP Wall-Mount Dust Collector
Excellent point-of-use dust collectors that can
be used next to the machine with only a small
amount of ducting. Specifications: 450 CFM, 7.2"
static pressure, 2 cubic foot bag, and 30 micron
filter. Motor is 1HP, 110V/220V, 14A/7A.
Figure 26. Point-of-use dust collectors.
Model G1163
Model G0710

Grizzly G0458 Specifications

General

Brand	Grizzly
Model	G0458
Category	Sander
Language	English