Grizzly G0708 - INTRODUCTION; Manual Accuracy; Contact Info; Machine Description

-2-
Model G0708 (Mfd. Since 1/15)
INTRODUCTION
This blast cabinet is designed for high-use media
blasting operations, where air flow up to 16 CFM
and air pressure up to 120 PSI can be used. Air
pressure is fully adjustable with an air pressure
regulator, and the media output can be adjusted
with the media flow valve. Blasting operations
through a hand-held blast gun are controlled by a
foot valve, and most operations can be carried out
with all types of blasting media.
An internal set of fluorescent work lamps provide
illumination during blasting operations, and a
built-in dust collector maintains blasting environ-
ment visibility. The cabinet is equipped with front
and side loading doors for ease of workpiece
loading and unloading. Media is quickly unloaded
through the hopper dump port door, and reloaded
through one of the doors.
Machine Description
We stand behind our machines. If you have
any questions or need help, use the information
below to contact us. Before contacting, please get
the serial number and manufacture date of your
machine. This will help us help you faster.
Grizzly Technical Support
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Email: techsupport@grizzly.com
We want your feedback on this manual. What did
you like about it? Where could it be improved?
Please take a few minutes to give us feedback.
Grizzly Documentation Manager
P.O. Box 2069
Bellingham, WA 98227-2069
Email: manuals@grizzly.com
Contact Info
We are proud to offer this manual with your new
machine! We've made every effort to be exact
with the instructions, specifications, drawings,
and photographs of the machine we used when
writing this manual. However, sometimes we still
make
an occasional mistake.
Also, owing to our policy of continuous improve-
ment, your machine may not exactly match the
manual
.
If you find this to be the case, and the dif-
ference between the manual and machine leaves
you in doubt,
check our website for the latest
manual update or call technical support for help.
Before calling, find the manufacture date of your
machine by looking at the date stamped into the
machine ID label (see below). This will help us
determine if the manual version you received
matches the manufacture date of your machine.
For your convenience, we
post all available man
-
uals and
manual updates for free
on our website
at
www.grizzly.com. Any updates to your
model
of
machine will be reflected in these documents
as soon as they are complete.
Manufacture Date
of Your Machine
Manual Accuracy