To Next Page
R
Ryan WashingtonJul 26, 2025
What to do if my Grizzly G1163 Dust Collector doesn't start?
- DDr. Terry AdamsJul 26, 2025
If your Grizzly Dust Collector doesn't start or the breaker trips, here's what you can check: 1. Make sure the disabling key is installed. 2. Verify the wall fuse/circuit breaker is adequate for the machine. Replace it if it's weak. 3. Ensure the power supply is switched ON and has the correct voltage. 4. Inspect wiring for breaks or loose connections and repair or replace as needed. 5. Replace the ON/OFF switch if it's faulty. 6. Test, repair, or replace the motor if it is at fault.
General
