Grizzly G4015Z User Manual

MODEL G4015Z
COMBINATION LATHE/MILL
OWNER'S MANUAL
COPYRIGHT © MARCH, 2002 BY GRIZZLY INDUSTRIAL, INC. REVISED MAY, 2007 (TR)
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#DD3737 PRINTED IN CHINA

Grizzly G4015Z Specifications

General

Motor Power	1 HP
Tailstock Taper	MT2
Spindle Taper	MT3
Tailstock Quill Travel	3 inches
Type	Benchtop Lathe

Summary

Section 1: Safety

General Power Tool Safety

Essential safety rules for operating power tools and specific precautions for lathe/mills.

Electrical Safety and Grounding

Guidelines for 110V operation, extension cords, and proper grounding to prevent shock.

Section 5: Assembly & Setup

Section 6: Lathe Controls

Lathe Speed and Feed Control

Adjusting spindle speeds via belts and operating feed selection levers.

Carriage and Tailstock Operation

Using carriage controls, half nut, and tailstock features for machining.

Section 7: Drill Press Controls

Drill Press Speed and Fine Feed

Adjusting drill press speeds and using the fine down feed mechanism.

Section 9: Operations

Control Panel and Test Run

Section 10: Maintenance

Lubrication Procedures