Need help?Do you have a question about the Grizzly G4016 and is the answer not in the manual?
Diagram labeling lathe parts and controls.
Explanation of safety symbols and general precautions.
Specific safety instructions for operating the lathe.
Guidelines for connecting the lathe to power.
Safety measures during machine setup.
Steps for assembling the lathe components.
Connecting power and checking lubricant levels.
Procedures for initial machine testing.
Safety rules for performing lathe operations.
Using the three-jaw chuck for workholding.
Using the four-jaw chuck for workholding.
Using the tailstock for support and drilling.
Technique for cutting tapers with the tailstock.
Ensuring proper alignment of tailstock and headstock.
Adjusting the compound slide for angles.
Mounting and using the four-way tool post.
Determining and setting appropriate RPM.
Operating carriage and slide feeds manually.
Activating and using power feed.
Using the feed rate chart to set feeds.
Configuring lathe for thread cutting.
Reconfiguring gears for metric threading.
Guidelines for lubricating machine parts.
Diagnosing and resolving machine problems.
To Next Page
General