Grizzly G5049Z User Manual

COMBINATION SANDER
MODEL G5049Z
INSTRUCTION MANUAL
COPYRIGHT © 1997 BY GRIZZLY INDUSTRIAL
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
OCTOBER, 1997. PRINTED IN TAIWAN
DISCONTINUED MACHINE MANUAL DISCLAIMER
THE INFORMATION IN THIS MANUAL REPRESENTS THE LAST CONFIGURATION OF THE MACHINE BEFORE IT WAS DISCONTINUED. MACHINE CON-
FIGURATIONS MAY HAVE CHANGED AS PRODUCT IMPROVEMENTS WERE INCORPORATED. IF YOU OWN AN EARLIER VERSION OF THE MACHINE,
THIS MANUAL MAY NOT EXACTLY DEPICT YOUR MACHINE . CONTACT CUSTOMER SERVICE IF YOU HAVE ANY QUESTIONS ABOUT DIFFERENCES.
PREVIOUS VERSIONS ARE NOT AVAILABLE ONLINE.

Grizzly G5049Z Specifications

General

Motor	1 HP, 120V/240V, single-phase, TEFC
Belt Size	6 in. x 48 in.
Belt Speed	2400 FPM
Disc Speed	1725 RPM
Table Size	8 in. x 16 in.
Voltage	120V
Type	Combination Belt/Disc Sander

Summary

Safety

Additional Safety Instructions For Sanders

Provides specific safety advice for sander operation, including handling, feed direction, and dust.

Circuit Requirements

110V Operation

Describes electrical requirements for the 1.5 HP motor and potential circuit issues.

Grounding

Explains the importance of grounding for operator safety and proper connection.

Assembly

Stand/Motor

Instructions for assembling the stand, attaching the motor mount, and aligning components.

Wiring The Motor

Details the process of connecting the motor wiring and reversing rotation.

Adjustments

Belt Replacement

Steps for safely removing and installing a new sanding belt.

Belt Tracking

Belt Tensioning

Operations

Horizontal Sanding

Curved Sanding

Disc Sanding

Maintenance