To Next PageTo Next Page
Need help?Do you have a question about the Grizzly G1140 and is the answer not in the manual?
General| Disc Speed | 1725 RPM |
|---|---|
| Motor | 1 HP |
| Voltage | 110V/220V |
| Disc Diameter | 9 inches |
| Belt Size | 6 inches x 48 inches |
Essential safety guidelines for operating machinery, including warnings and precautions.
Specific safety precautions tailored for the operation of edge sanders.
Details on plugs, outlets, and grounding for safe electrical connection.
Minimum circuit size and amperage requirements for safe operation.
Crucial safety warnings before starting the setup process.
Steps for assembling and attaching the main work table.
Procedure to align the sanding belt before initial operation.
Critical safety guidelines for operating the edge sander.
Step-by-step guide to installing a new sanding belt.
Procedure for aligning and tracking the sanding belt.
Recommended daily and weekly/monthly checks for optimal machine performance.
Solutions for common motor and electrical problems.
Solutions for common operational problems and symptoms.
How to adjust the belt tensioner for proper belt tension.
Procedure to reset the spring tension on the belt tensioner.
How to align the belt to track parallel with the platen.
Adjusting the platen and rollers for proper alignment.
Diagram for connecting the motor at 220V.
