17 5105862_-_HI
4. OPERATING INSTRUCTIONS CONTINUED
4.9 OPERATING THE SPRAYER
• The sprayer has a pattern width of approximately 11 feet with the broadcast tip. The effective pattern
width is approximately 7 feet wide which allows the same pass width as the spreader. For this reason,
the spreader and spraying systems may be operated at the same time.
• Add the required materials to the spray tank.
• Note the direction of the wind and plan an application path that allows the spraying to occur down-
wind.
• Avoid spraying in windy conditions as the spray may carry to non-target areas.
• Carefully step onto the operator platform.
• Rotate the spray width knob to the desired setting.
• Place the gear selector in second gear (2).
• Squeeze the throttle lever to start the machine rolling forward.
• Activate the spray control lever (horizontal position).
• To stop the spraying operation, deactivate the spray control lever (vertical position), release the throt-
tle lever, and depress the brake pedal.
To Next Page
Loading...
