Groundsman TMC26 - Blades and Accessories; Blade Types and Specifications

Page 19
Blades and Accessories
See our product accessories catalogue for more details about available blades and accessories or go to
“ACCESSORIES” on our website www.groundsmanindustries.com
Customised blade can be manufactured to your specification, contact Groundsman Industries Ltd.
Phone: (+44) 028 2766 7049 Fax: (+44) 028 2766 6855 Email: info@groundsmanindustries.com
SOD BLADES
* Symbol indicates most commonly used
Width Part Number
30cm (12”) Blade Sod Cutting TC26BS30
35cm (14”) Blade Sod Cutting TC26BS35
40cm (16”) Blade Sod Cutting * TC26BS40
45cm (18”) Blade Sod Cutting * TC26BS45
50cm (20”) Blade Sod Cutting TC26BS50
SERRATTED SOD BLADES
*For cutting fibre reinforced sod, heather etc.
Width Part Number
30cm (12”) Blade Sod Cutting TC26BSS30
35cm (14”) Blade Sod Cutting TC26BSS35
40cm (16”) Blade Sod Cutting * TC26BSS40
45cm (18”) Blade Sod Cutting * TC26BSS45
50cm (20”) Blade Sod Cutting TC26BSS50
MOLE-DRAIN & DE-COMPACTION BLADES
*Produces a single cut on the surface cultivating
or mole-draining beneath to 10cm (4”) depth
Depth Part Number
10cm (4”) Blade Mole-drain TC26BM10
10cm (4”) Blade De-compact TC26BD10
TRENCH CUTTING BLADES
*Produces a cleanly cut spade width strip of turf to 10cm
(4”) deep that can be lifted out to dig a trench and
replaced the sod when completed.
Width Depth Part Number
16cm (7”) 10cm (4”) Blade Trench TC26BT1610
REVETTING SOD CUTTING BLADES
*Two strips of sod cut with one blade for sod-walling or
bunker building.
Width Part Number
2 x 15cm (2x6”) Blade Revetting TC26BR30/2
2 x 17.5cm (2x7”) Blade Revetting TC26BR35/2
2 x 20cm (2x8”) Blade Revetting TC26BR40/2
2 x 22.5cm (2x9”) Blade Revetting TC26BR45/2
2 x 25cm (2x10”) Blade Revetting TC26BR50/2