Blades
Blade Mounting : Three Bolt Tri-Pad Mounting
Sod Cutting : Depth 7cm (3”)
Width 30cm (12”)
35cm (14”)
40cm (16”)
45cm (18”)
50cm (20”)
De-compact / Mole Drain / Trench : Depth 10cm (4”)
Adjustments : Cut Depth 0cm — 7cm infinitely variable
Cut Angle 1deg — 6deg infinitely variable
Machine
Overall Dimensions : Width 66cm (26”) At Handles
50cm (20”) At Safety Guard
Length 120cm (47”) Handles Folded
160cm (63”) Handles Un-folded
Height 80cm (32”)
Machine Weight : 158kg (348lbs) blade fitted
Engine : 6.5 HP Honda GX200
Primary Drive : Enclosed centrifugal clutch & belt drive.
Blade Drive Central connecting rod and eccentric drive shaft sealed bearings
throughout.
Ground Drive Oil filled worm gear engaging central drive axle.
Wheels Front Stud mounted 300mm diameter solid rubber turf tread wheels.
Wheel Rear Ball bearing rim with smooth pneumatic 9 X 3.50 - 4 tyre. Caster
mounted with foot operated caster lock for straight and curve
cutting plus transport .
Performance Chart
Depth
Adjustable
(Maximum)
Cutting widths
Forward
Speed
HAV Levels (Handle Bar
Vibration)
TURF CUTTING
7cm (3”)
Mole &
De-Compact
10cm (4”)
TRENCH
16cm
SOD
30cm to 50cm
27 mtrs/min
(29 yds)
6.68 (m/s
2
)
Maximum
Operating Time
1.12 Hours
Page 5
TMC26 Technical Specification
To Next Page
Loading...