To Next PageTo Next Page
Need help?Do you have a question about the Groundsman TMC26 and is the answer not in the manual?
General| Weight | 140 kg |
|---|---|
| Working width | 26 inches |
| Engine Type | 4-stroke |
| Fuel Tank Capacity | 3.1 liters |
| Cutting System | blade |
Details on blade types, widths, and cutting depths for various tasks.
Information on overall dimensions, weight, engine, drive systems, and wheels.
Lists and describes the main assemblies of the TMC26 machine, including chassis, engine, and drive systems.
Explains the engine, clutch, V-belt drive, and ground drive mechanisms in detail.
Details the front axle, blade assembly, rear wheel, and chassis construction for optimal performance.
Identifies and explains controls for operating handles and maneuvering the machine.
Describes levers and indicators for adjusting cutting depth and engaging ground drive.
Details controls for the Honda engine and blade engagement mechanisms.
Explains how to adjust the blade angle using the tail-wheel mounting bracket.
Guides on setting up operator handles and adjusting the cutter blade depth.
Details procedures for precise cutting depth selection and setting the depth stop.
Covers adjusting blade angle and operating the ground drive system.
Instructions for engaging cutter/ground drives, starting the engine, and safe transport.
Procedures for operating the machine in work and safely changing cutting blades.
Guidance on fitting de-compactor, mole-drain, and trench blades.
Routine checks and maintenance for the engine and air filter.
Procedures for checking, tensioning, and replacing main drive and blade drive belts.
Instructions for checking gearbox oil levels and lubricating grease points.
Importance of checking cutter blade mounting bolts for tightness and wear.
Information on reversible and narrow blade wheels, including removal procedures.
Instructions on using the lifting eyelet for loading or wheel removal.
Details on various blade types, their uses, and corresponding part numbers.
