EasyManuals Logo

Growatt 2000-US User Manual

Growatt 2000-US
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
43
FCC certificate
Point of connection for grounding protection.
Symbol
description
1.6 Markings on this product
Warning regarding dangerous voltage
The product works with high voltage. All work on the
product must only be performed as described in its
documentation.
Beware of hot surface
The product can become hot during operation. Do not
touch the product during operation.
Observe the operating instructions
Read the product's documentation before working on it.
Follow all safety precautions and instructions as
described in the documentation.
Intertek ETL mark
it apply to the Growatt -US series certify that the
inverter meet the safety standard UL1741.
Direct Current (DC)
Alternating Current (AC)
2 Safety and conformity
2.1 Safety Instructions
Danger to life due to lethal voltages!
Lethal voltages are present within the unit and on the
power supply lines. Therefore, only authorized electricians
may install and open the unit.
Even when the unit is disconnected, high contact voltages
may still be present within the unit.
DANGER
DANGER
Danger of burn injuries due to hot enclosure parts!
During operation, the four sides of the enclosure lid and the
heat sink may become hot.
Only touch the front enclosure lid during operation.
CAUTION
Possible damage to health as a result of the effects of
radiation!
In special cases, there may still be interference for the
specified application area despite maintaining
standardized emission limit values (e.g. when sensitive
equipment is located at the setup location or when the
setup location is near radio or television receivers).In this
case, the operator is obliged to take proper action to rectify
the situation.
Do not stay closer than 20 cm to the inverter for any length
of time.
NOTICE
Grounding the PV generator
Comply with the local requirements for grounding the PV
modules and the PV generator. Growatt recommends
connecting the generator frame and other electrically
conductive surfaces in a manner which ensures continuous
conduction with ground these in order to have optimal
protection of the system and personnel.

Other manuals for Growatt 2000-US

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Growatt 2000-US and is the answer not in the manual?

Growatt 2000-US Specifications

General IconGeneral
BrandGrowatt
Model2000-US
CategoryInverter
LanguageEnglish

Related product manuals