To Next PageTo Next Page
Need help?Do you have a question about the Growatt 2000-US and is the answer not in the manual?
General| Model | Growatt 2000-US |
|---|---|
| Rated Power | 2000W |
| Nominal Grid Frequency | 60Hz |
| Total Harmonic Distortion | <3% |
| Power Factor | >0.99 |
| DC Connection Type | MC4 |
| Protection Degree | IP65 |
| Topology | Transformerless |
| Nominal AC Power | 2000VA |
| Operating Temperature Range | -25°C to +60°C |
| Communication | WiFi |
| Cooling Method | Natural Cooling |
Specifies the scope of the manual for Growatt inverters.
Identifies the manual as intended for qualified installation personnel.
Directs users to the manufacturer's website for more information.
Provides guidance on storing the manual and related documents.
Explains the meaning of various safety and information symbols used in the document.
Outlines crucial safety warnings related to electrical hazards and operation.
Presents a visual diagram and basic overview of the inverter unit.
Details the content and location of the inverter's identification label.
Lists the physical dimensions and weight for different inverter models.
Offers guidelines and precautions for transporting the inverter safely.
Details the steps for unpacking and visually inspecting the inverter for damage.
Emphasizes critical safety rules and precautions for the installation process.
Highlights specific electrical safety precautions before making connections.
Presents system diagrams illustrating electrical connections for different configurations.
Defines key technical terms used throughout the manual.
Covers the information displayed on the LCD and system messages.
Describes the initial startup display sequence and information shown.
Explains how to navigate and control the LCD display functions.
Introduces various products and software for monitoring inverter performance.
Describes Shine Net PC software for real-time and historical monitoring.
Covers optional WiFi and Shinelan monitoring schemes.
Step-by-step instructions for initiating inverter operation.
Procedures for safely disconnecting the inverter from power sources.
Explains how to check and improve the inverter's heat dissipation.
Details the correct method for cleaning the inverter's exterior.
Outlines how to inspect and maintain the DC switch.
Instructions for safely removing the inverter from its installation.
Guidelines for packing the inverter for transport or storage.
Recommendations for storing the inverter in suitable conditions.
Information on the proper disposal of the inverter as electronic waste.
Describes the conditions and indicators for normal inverter operation.
Details the conditions and indicators when the inverter is in fault mode.
Explains the conditions under which the inverter enters shutdown mode.
Lists comprehensive specifications including input/output data, dimensions, and operating conditions.
