31
32
8. Monitoring Method
8.1 Remote Data Monitoring
8.1.1 Mobile APP (ShinePhone) remote monitoring
MAC series inverter remote data monitoring methods include mobile APP and server
WEB, RS485, GPRS, 4G can meet the above two monitoring methods.
1.You can download and install the app by scanning the QR code below or by searching
for "ShinePhone" in the Google/Apple store.
Note:
1. Make sure you are installing the latest version of the software.
2. For details, please refer to the contents on http://server-cn.growatt.com.
3. There are two ways to register your mobile phone APP：
Method 1: Go to the mobile APP login page and click “One button to build a station”.
Scan the barcode to obtain the serial number of the collector, and complete the
registration by filling in the mobile phone number, password, agent number and other
information with one-click registration.
Method 2: Go to the mobile APP login page and click on “Register”.
Registration is required to fill in the information, with an * is required. After completing
the registration, you can log in to the main interface of ShinePhone. The registration
page and main interface are as shown below:
Figure 8.1
Figure 8.2
Figure 8.3
ShinePhone Main interface：
1>The center of the main interface shows the current power station name. You can
switch between different power stations in the account by clicking the invertedtriangle
symbol.
2>Add a collector, view the collector, and add a power station by clicking the + sign I
the upper right corner of the main interface.
3>The top of the main interface shows the total power, power generation and revenue of
the current power plant's inverter.
4>“My device "shows the inverter of the current power station, click on the inverter name
to enter the details interface, or you can top and edit it by left sliding. Editing includes
modifying the alias and deleting the device.
1>Add a collector to add multiple collectors under the specified power station name.
Way: click “+”on the top right corner to add datalogger（ WiFi/GPRS etc） as 7.1.1
02(Note:
If add wifi datalogger will need to configure it manually, scan the wifi datalogger for 2
seconds until a window pops up, then choose configure datalogger, APP will get the WIFI
name , only need to input password and click set, around 30 seconds, the configuration
will be done successfully.
2>User can add datalogger at the datalogger list page to add a datalogger, edit, delete,
configure etc.
3>User can add more plants with the add Plant function.
Collector:
Add collector interface
Collector list interface
Add power station interface
To Next Page
Loading...
Need help?
General