Growatt MID 10KTL3-X - Page 14

21
22
9.1.3 Parameter setting (advanced setting)
Advanced
settings
Password
111
Password
111
Password
N11
Password
111
Password
1N1
Password
111
Password
11N
Voltage level
Anti-backflow
function
OFF ON
dynamometer
OFF ON
Factory
settings
0
1
2
Anti-backflow
function
OFF ON
Anti-backflow
function
OFF ON
Electric
CT
Zero ground
detection
Prohibited
Off-grid
setting
Prohibited
Energy storage
setting
Grid charging
Time period
setting
Manual off-grid
Prohibited
dynamometer
OFF ON
dynamometer
OFF ON
Zero ground
detection
Prohibited
Zero ground
detection
Open
Off-grid
setting
Prohibited
Manual off-grid
Prohibited
Manual off-grid
Enable
Password
111
Password
111
Password
N11
Password
111
Password
1N1
Password
111
Password
11N
Prohibited
Enable
Gridprio 09-
13
Time1:Enable
Loadprio 09-
13
Time1:Enable
Batprio 09-13
Time1:Enable
Gridprio 09-
13
Time1:Enable
Gridprio 09-
13
Time1:Enable
Gridprio 09-
13
Time1:Enable
Gridprio 09-
13
Time1:Disable
Gridprio 09-
13
Time2:Enable
Loadprio 09-
13
Time2:Enable
Batprio 09-13
Time2:Enable
Gridprio 09-
13
Time2:Enable
Gridprio 09-
13
Time2:Enable
Gridprio 09-
13
Time1:Enable
Gridprio 09-
13
Time1:Disable
Time OutRang!
Wrong
Password
In
settings...
Successful
setup
Electric
CT
Off-grid
setting
Enable
Country/Region
VDE0126
Country/Region
VDE0126
Country/Region
G99
Country/Region
N4105
Country/Region
G98
Country/Region
Ireland
Country/Region
EN50438
Country/Region
Belgium
Country/Region
Demark
Country/Region
Sweden
Country/Region
Norway
Country/Region
France
NO
YES
NO
YES
The main settings are as follows:
General settings
Setting item
Language settings
Address setting
Date setting
Time setting
Advanced settings(requires password)
Setting item
Country/Region
Voltage level
Anti-backflow
function
Zero ground
detection
Off-grid setting
Manual off-grid
Energy storage
setting
Other function
settings
Reset
After the inverter works normally for 5 minutes, the OLED display will be automatically
turned off. At this time, the OLED has no display, indicating that the leaf of the window is
green, and it is necessary to view the display data or perform setting to enable the OLED
to be redisplayed by touch operation.
9.2 OLED display wake up
9.3 Touch operation
The machine has a touch button and functions as follows:
① Touch once: switch function, turn to the next page or select the switch option in the
setting item;
② Touch twice in succession: Confirm function, enter setting item or confirm setting;
③ Touch three times in succession: return/exit function, return to the previous menu or
exit the current setting item;
④ Long press 5S: power-up country selection; data clear initial value;