Growatt MID 30KTL3-X - Page 29

Model
Specifications
MID
30KTL3-X
MID
33KTL3-X
MID
36KTL3-X
MID
40KTL3-X
Protection devices
DC reverse-polarity protection
YES
DC switch
YES
DC Surge protection
typeII OPT
Insulation resistance monitoring
YES
AC surge protection
typeII OPT
AC short-circuit protection
YES
Grid monitoring
YES
Anti-islanding protection
YES
Residual-current monitoring
unit
YES
String Fuse protection
YES
String monitoring
OPT
AFCI protection
OPT
General data
Dimensions (W / H / D) in mm
580*435*280mm
Weight
30kg
31kg
Operating temperature range
-25°C ... +60°C
(>45°CDerating)
Noise emission (typical)
≤50dB(A)
Altitude
4000m
Internal consumption at night
1W
Topology
Transformerless
Cooling
Smart air cooling
Electronics protection degree
IP66
Relative humidity
0~100%
DC connection
H4/MC4(OPT)
AC connection
Waterproof PG head+OT terminal or quick connect terminal
Interfaces
Display
OLED+LED
USB/RS485
YES
WIFI/GPRS/4G/RF/LAN
OPT
17.2 Torque
Shell cover screw
12kgf.cm
AC terminal block
14kgf.cm
AC waterproof cover fixing screw
4kgf.cm
Security screws on the wall mount
20kgf.cm
Ground screw
20kgf.cm
17.3 Annex
Product attachments can be selected from the table below:
Name
Brief
Shine GPRS-X
USB interface GPRS monitoring module
Shine WIFI-X
USB interface WIFI monitoring module
Shine 4G-X
USB interface 4G monitoring module
Shine RF-X
USB interface RF monitoring module
Shine LAN-X
USB interface LAN monitoring module
The inverter can be repaired on site or transported to the Growatt service center for
repair, or it can be replaced with a new one based on the model and service life of the
machine.
The warranty does not include the cost of recovery and transportation of faulty
equipment. The cost of installation or reinstallation of malfunctioning equipment should
also be clearly excluded from other related logistics and processing costs incurred by
warranty claims related to various aspects.
52
51