Growatt MIN TL-X User Manual (English)

To Next Page

Growatt MIN TL-X inverter wireless monitoring system setup

There are 2 methods in setting up this, one is through the App, the other is through the AP mode.

Before setup, please make sure your home modem/router is working at 2.4GHz If your

modem/router is emitting two signals (2.4GHz and 5GHz), please connect your phone to the

2.4GHz WiFi as it offers coverage of farther distance.

1. Find the data logger/WiFi dongle, this is installed underneath the inverter. Open the

rubber cap on the top of the WiFi dongle and find the LED light and Reset button in the

hole.

2. Push the Reset button of the WiFi dongle for 6 seconds to reset it.

LED"Indicator"

Reset"button"

Need help?

Do you have a question about the Growatt MIN TL-X and is the answer not in the manual?

Growatt MIN TL-X Specifications

General

Number of MPPTs	2
THDi	< 3%
Max. Efficiency	98.4%
DC Switch	Yes
Display	LCD
Protection Degree	IP65
Topology	Transformerless
Rated AC Voltage	230V
AC Voltage Range	180 V - 280 V
Power Factor	0.8 leading - 0.8 lagging
AC Grid Frequency	50 Hz / 60 Hz
Operating Temperature Range	-25°C to 60°C
Relative Humidity	0 - 100%
Communication	WiFi / GPRS
Protection	DC Reverse Polarity Protection, AC Short Circuit Protection, Overcurrent Protection, Overvoltage Protection