Growatt ShineWiFi-X - Page 22

GROWATT NEW ENERGY TECHNOLOGY CO.,LTD － Powering Tomorrow
22
Trouble shooting
Blue flashing on
datalogger
,no data on
Shinephone App
Please go
to‘Plant'on Shinephone and click‘add
datalogger’
and scan the code on
datalogger again.
Datalogger
is soild green
light
Datalogger
failed to connect to Wifi.
①
Wifi is not 2.4 GHz.
②
Enter wrong Wifi name or password when using AP mode.
③
Wifi singal is weak.
Wifi
is not 2.4 GHz
①
Check from the inbuilt IP page of router and disable 5GHz.
②
Contact internet supplier to change the Wifi to 2.4 Ghz.
After configuration in
Shinephone
, the datalogger
light is not flashing blue or
solid green
Please reset datalogger to flashing red and do the
configuration again.