What to do if the Growatt SPA 3000TL BL Inverter displays 'Grid voltage fault'?
If your Growatt Inverter is showing a grid voltage fault, first ensure that the AC voltage is within the range of your local standard. Also, check that the AC cable is securely connected.
General| Model | SPA 3000TL BL |
|---|---|
| Max. DC Voltage | 550 V |
| Number of MPP Trackers | 1 |
| Max. Input Current | 13 A |
| Nominal AC Power | 3000 W |
| Max. AC Current | 13.6 A |
| Nominal AC Voltage | 230 V |
| Nominal Grid Frequency | 50/60 Hz |
| Power Factor | >0.99 |
| THDi | <3% |
| DC Switch | Yes |
| Protection Degree | IP65 |
| Topology | Transformerless |
| Rated Output Voltage | 230 V |
| Output Frequency | 50/60 Hz |
| Cooling Method | Natural Convection |
| Humidity | 0-100% (non-condensing) |
| AC Voltage Range | 180 V - 280 V |
| Operating Temperature Range | -25°C to 60°C |
| Communication | WiFi |
Highlights the importance of reading the manual and adhering to safety guidelines before installation and operation.
Explains various safety symbols used throughout the manual for hazard identification and warnings.
Outlines essential criteria for selecting a suitable installation location for the SPA series.
Lists the necessary tools and instruments required for the installation process.
Provides step-by-step guidance for mounting and installing the SPA series inverter on a wall.
Details various methods for connecting the SPA series inverter to different electrical systems.
Provides a step-by-step guide for correctly connecting the battery to the SPA series inverter.
Specifies the procedure and requirements for grounding the SPA series inverter.
Steps to perform after installation to bring the SPA series inverter online.
Guides users on configuring various work modes and parameters for the SPA series.
Provides steps for safely starting up the SPA series inverter.
Lists common error messages and provides solutions for troubleshooting SPA series issues.
To Next Page