Need help?Do you have a question about the Growatt SPF 6000T DVM and is the answer not in the manual?
General| Model | SPF 6000T DVM |
|---|---|
| Input Voltage Range | 120-450VDC |
| MPPT Voltage Range | 120-430VDC |
| Battery Voltage | 48VDC |
| Rated Power | 6000W |
| Output Voltage | 230VAC |
| Output Frequency | 50/60Hz |
| Efficiency | 93% |
| MPPT Range | 120VDC ~ 430VDC |
| Operating Temperature | -10°C to +50°C |
| Communication | USB |
| Protection | Overload, over temperature, short circuit, reverse polarity |
Contains critical safety warnings and operating instructions.
Lists the key capabilities and features of the inverter.
Steps for checking package contents and ensuring no damage.
Instructions and considerations for physically installing the unit.
Specifies the appropriate cable gauge and terminal size for battery connections.
Details on how to connect lithium batteries, including BMS communication.
Configuration steps for lithium battery BMS communication and settings.
Details on setting battery types and their related parameters.
Describes the inverter's overload handling capabilities and time limits.
Describes the three charging stages: Bulk, Absorb, and Float.
Instructions on how to turn the unit on and off.
Describes the front panel, including LEDs and function buttons.
Configures the priority for supplying power to loads from different sources.
Sets the target voltage for battery equalization.
Sets the total maximum charging current for solar and utility chargers.
Sets the battery type and communication protocol for BMS integration.
Enables or disables the battery equalization function.
Lists fault codes, their corresponding events, and display icons.
Lists warning codes, audible alarms, and icon flashing patterns.
Troubleshooting steps for units shutting down during startup.
Troubleshooting steps for units that do not respond after power on.
Troubleshooting for continuous buzzer sounds and red LED indication.
Technical specifications related to the inverter's output.
Technical specifications for the solar charging function.
Technical specifications for the DC input parameters.
Technical specifications for the AC input parameters.
Specifications for bypass mode and protection features.
To Next Page