Need help?Do you have a question about the Growatt SPF 12000T DVM-US and is the answer not in the manual?
Crucial safety precautions and warnings for installation and operation.
Specifies cable gauges and torque for secure battery connections.
Instructions for connecting lithium batteries and their Battery Management System (BMS).
Sets the battery type (AGM, Flood, Lithium) affecting charge parameters.
Sets the priority for power sources (Solar, Utility, SBU).
Sets the total charging current limit for solar and utility.
Configures the output voltage and frequency of the inverter.
Sets the maximum charging current from the utility.
Sets priority for solar, utility, or combined charging sources.
Configures CV charging and floating charging voltages.
Sets the voltage threshold for DC cut-off.
Enables or disables the battery equalization function.
Sets the specific voltage for battery equalization.
Specifies cable gauge and torque for AC input/output connections.
Guidelines for selecting PV modules based on voltage and battery parameters.
Details overload handling and fault response times.
Lists max AC charging current for different models.
Addresses issues causing the unit to shut down after powering on.
Troubleshooting steps for a unit that does not power on.
Diagnoses and resolves continuous buzzing and red LED indication.
To Next Page
General