Need help?Do you have a question about the Growatt SPF 12000T DVM and is the answer not in the manual?
General| Model | SPF 12000T DVM |
|---|---|
| Rated Power | 12000W |
| Max. PV Array Power | 18000W |
| Output Frequency | 50/60Hz |
| Max PV Input Power | 18000W |
| Battery Voltage | 48V |
| Max. PV Input Voltage | 500V |
| Operating Temperature | -10°C to 50°C |
| Protection | Over Temperature Protection |
Provides crucial safety warnings and operating guidelines.
Provides guidelines and considerations for physically installing the inverter.
Provides step-by-step instructions for connecting the battery to the inverter.
Details the procedure for connecting lithium batteries and their BMS.
Illustrates the wiring connections for 240Vac and 120Vac outputs.
Provides step-by-step instructions for connecting AC input and output.
Provides step-by-step instructions for connecting PV modules to the inverter.
Describes the dry contact port and its use for generator signaling.
Details the inverter's behavior under overload conditions and fault timing.
Explains the soft start feature to manage inrush current.
Covers icons for programs, faults, warnings, and battery status.
Configures the priority for load power sources: Solar, Utility, or SBU.
Lists fault codes, their corresponding events, and displayed icons.
Lists warning codes, events, audible alarms, and icon flashing patterns.
Addresses issues where the unit powers off during startup or doesn't respond.
Diagnoses and resolves issues related to continuous buzzing and red LED indicators.
Details inverter output power, voltage, frequency, and solar charging parameters.
Covers DC input voltage limits and AC input voltage ranges.
Details transfer time, protection, and physical dimensions.
To Next Page