Need help?Do you have a question about the Growatt ZigBee Module and is the answer not in the manual?
General| Model | Growatt ZigBee Module |
|---|---|
| Communication Protocol | ZigBee |
| Frequency | 2.4 GHz |
| Data Transmission Rate | 250 kbps |
| Compatibility | Growatt Inverters |
| Power Supply | 5V DC |
| Operating Temperature | -20°C to 60°C |
| Humidity | 0-95% RH, non-condensing |
| Dimensions | Varies depending on the exact model, typically around 80mm x 50mm x 20mm |
Legal statement regarding copyright and usage of the document.
Introduction to the manual's purpose, scope, and target audience.
Identifies the intended audience for operating and maintaining the ZigBee Module.
Instructions for careful reading and referencing the manual for accuracy.
Regulatory compliance information and potential interference warnings for the device.
Enter ZigBee ID within the range between 1000 and 9999 in the parameter field.
Enter the ZigBee channel between 11 and 25 in the parameter field.
Connecting the ZigBee Module to the inverter via the RS232 port.
Troubleshooting steps for when 'Setting New PAN ID Failed' message appears.
Resolving issues when PAN ID reads as 'FF FE' after attempting to read it.
Choosing between wireless or wired monitoring schemes for inverter communication.
Details on inverter protocol and communication range for the ZigBee module.
Information regarding voltage requirements and power consumption of the module.
Specifications for ambient temperature, humidity, and degree of protection.
Physical dimensions and net weight of the ZigBee Module.
To Next Page
