Grundfos AR - Dosing Controller Functionality; Memory Function; Current Input - Weighting

English (GB)
19
Figure for the second function level
Fig. 27 Second function level
8.7.3 Dosing controller
If installed, the dosing controller can be switched on and off.
8.7.4 Memory function
Used to store excess contact inputs for later processing.
8.7.5 Current input - weighting
In current input/output operation, the dosing capacity is controlled
via the current signal. The pump emits a current signal as a
feedback to the control room or master/slave applications.
TM03 6372 4506
Stop
Start
Stop
Start
Stop
Start
Stop
Start
Stop
Start
Stop
Start
Stop
Start
Stop
Start
Down
Up
Menu
Menu
Menu
Code
C:111
Code
flow
OFF
Memory
ON
Analog
20
mA
Analog
120
1/min
Menu
Menu
Menu
Menu
0001
h
ON / OFF
Down
Up
ON / OFF
Down
Up
5 - 20 mA
Down
Up
24 - max. [1/min]
Down
Up
0001 = 10 h - 9999 = 99 990 h
Keep pressed for 3 seconds
Weighting of
current input
Operating
hours counter
Switch dosing controller on/off
Saving of approx. 65,000
contacts signals
Select value for current input
Select value for stroke
frequency
Display of operating time of drive
Dosing controller (not
with all pump types)
Memory function
Weighting of
current input