Grundfos CIM 500

A.1.3. Login
For administration of username and password, see the section about user management in the appendix.
If you experience problems with logging in to the webserver after a firmware update, perform a
factory reset.
TM074522
Login
Object Description
Username
Enter username.
Default: admin.
Password
Enter password. Default: Grundfos.
After the first log in, you are forced to change the password.
The password must contain:
•
at least 8 and maximum 20 characters
• at least one lower case letter
• at least one upper case letter
• at least one numeric or special character.
When logging in, you have four attempts before a back-off algorithm starts an
exponentially increasing time delay between each attempt. Power cycling CIM 500 resets
the back-off algorithm.
281
Appendix A