Grundfos CIM 500

Object Description
Custom device
instance enable
If ticked, CIM 500 is configured to use a BACnet custom device instance number.
Foreign Device If ticked, CIM 500 is configured as a foreign device.
IP Address Enter the foreign IP address.
UDP Port Enter the foreign UDP port number. The default number is 47808.
Re-Register Time
Enter the time period in seconds during which the foreign device must re-register on the
BACnet network.
Network Watchdog
T
imer
If enabled and BACnet communication stops, the watchdog timer restarts the internal network
module if it times out.
You can configure the time-out from 2 minutes to 1440 minutes in steps of 1 minute.
A value of 1 is illegal and a value of 0 disables the watchdog.
288
Appendix A